June 2016

MODIG HHV Bar Mill Driven by ICAM’s Integrated Post-Processor & Simulator

June 1st, 2016|Categories: RELEASES 2016|

ICAM Technologies Corp. provides Modig Machine Tool factory-proven post-processing and machine simulation solutions supporting all major CAD/CAM systems. This video, featuring an introduction by David Modig, President of Modig Machine Tools, shows ICAM’s post-processing and machine simulation solution working off-line to maximize the performance of the HHV Bar Mill on the shop floor. [...]

May 2016

ICAM SmartCUT™ and SmartFEED™ Optimization Modules Reduces Cycle-Time by 42%!

May 30th, 2016|Categories: RELEASES 2016|

In this simple example, ICAM shows how cycle-time was reduced by 42% when implementing its SmartCUT™ and SmartFEED™ optimization technologies.

ICAM facilite le passage de la conception à la fabrication

May 9th, 2016|Categories: PUBLICATIONS|

Une solution qui facilite le passage de la conception d’un produit à sa fabrication arrive à point nommé pour les manufacturiers. ICAM, société informatique de Sainte-Anne-de-Bellevue, a lancé une solution innovatrice réduisant en moyenne de 25 à 35 % le temps consacré à la programmation, l’essai et l’erreur lors du processus de conception d’un objet [...]

April 2016

ICAM Technologies Corporation Using SIEMENS NX?

April 29th, 2016|Categories: RELEASES 2016|

Checkout our Adaptive Post-Processing™ technology integrated inside NX CAM at the upcoming 2016 SIEMENS PLM Connection held at the Rosen Shingle Creek Hotel in Orlando, Florida!

ICAM’s booth at Aerospace & Defense Supplier Summit in Seattle, Washington.

April 14th, 2016|Categories: EVENTS|

ICAM presents its new Adaptive Post-Processing™ technology at the Aerospace & Defense Supplier Summit in Seattle, Washington!

ICAM’s booth at MACH UK 2016

April 12th, 2016|Categories: RELEASES 2016|

ICAM's presents its new Adaptive Post-Processing™ technology at MACH UK 2016 at the Desktop Engineering's Booth (#4379) - ICAM's official reseller in the UK.

March 2016

ICAM Presents its Adaptive Post-Processing Solution at COE 2016

March 9th, 2016|Categories: RELEASES 2016|

Don't miss this opportunity to discover ICAM's Adaptive Post-Processing™ Technology - the evolution of machine simulation - at the COE 2016 Annual Conference & Technifair at booth #317!

December 2015

November 2015

ICAM Corporate and Unique Technology Overview

November 24th, 2015|Categories: RELEASES 2015|

This video overviews ICAM Technologies Corp. and highlights the unique advantages of its unique Adaptive Post-processing™ as compared to the traditional manufacturing process.

2015 Canadian Aerospace Summit

November 4th, 2015|Categories: RELEASES 2015|

Visit ICAM at the 2015 Canadian Aerospace Summit at booth #424 to learn how its new Adaptive Post-Processing™ solution can help you reduce NC programming and machine cycle times!